Help
How to use your Redoak Mail account page, screen by screen.
Your Redoak Mail account page
This site is where you manage your @redoakgroup.org mailbox. Reading and writing email happens in webmail (mail.redoakgroup.org) or in your phone and computer mail apps.
- Sign in to manage your account.
- Use “Set up your phone or computer” to add your mailbox to a mail app.
- Use “Open webmail” to read your mail in the browser.
Signing in
Sign in with your full email address (you@redoakgroup.org) and your mailbox password, the same one you use in webmail.
- Enter your full email address.
- Enter your password. Press “Show” next to the password to check what you typed; press “Hide” to hide it again.
- Press “Sign in”.
- After 5 wrong passwords in 15 minutes, the address is locked for 15 minutes, even with the right password. Wait, or use “Forgot password?”.
- You're signed out automatically after 30 minutes without activity, and after 12 hours at most.
- Only @redoakgroup.org addresses can sign in here.
Forgot your password
If you set up a recovery email, you can choose a new password yourself. If not, ask your email administrator to reset it.
- On the sign-in page, press “Forgot password?”.
- Enter your @redoakgroup.org address and press “Send reset code”.
- Open the email we sent to your recovery address and copy the 6-digit code. It expires in 10 minutes.
- Enter the code and your new password twice, then press “Reset password”.
- Sign in with the new password, and update it in the mail apps on your phone and computer.
- For your security, the page says the same thing whether or not an address exists or has a recovery email.
- Resetting your password signs you out everywhere.
- You can ask for up to 3 codes in 15 minutes. Each code allows 5 tries.
Your account
After signing in you can change your password, set your recovery email, set up your devices, open webmail, or sign out. Email admins also see “Email admin”.
Changing your password
Choose a new password whenever you like. You'll need your current password.
- Go to Your account → Change password.
- Enter your current password.
- Enter a new password. The list below the box ticks off each rule as you meet it.
- Enter the new password again and press “Change password”.
- A new password must have at least 12 characters, must not contain your email address or name, and must not be a common password.
- Changing your password signs you out on every other device. Update it in your phone and computer mail apps, or they'll stop receiving mail.
Recovery email
A recovery email lets you reset your password yourself if you forget it. Use a personal address outside @redoakgroup.org.
- Go to Your account → Recovery email.
- Enter the recovery address and your mailbox password, then press “Send confirmation code”.
- Enter the 6-digit code from the email sent to that address, and press “Confirm”.
- When you change it later, your previous recovery address gets a notice.
- “Use a different address” cancels a code you no longer need.
Setting up your phone or computer
Add your @redoakgroup.org mailbox to the mail app you already use. Your username is always your full email address.
- iPhone, iPad, Mac: on the setup page, press “Download the setup profile”, then go to Settings → Profile Downloaded → Install, and enter your password when asked.
- Android and other phones: add an account in your mail app, choose IMAP (or Other), and enter the settings shown on the setup page. Scan the QR code to open the page on your phone.
- Outlook and Thunderbird: add an account with your email address and password. The app finds the settings by itself.
- Incoming mail: IMAP, port 993, SSL/TLS. Outgoing mail: SMTP, port 587, STARTTLS (or 465, SSL/TLS), with the same username and password.
Email admin (for admins)
Your company's email owner and admins manage redoakgroup.org email here. Open it from Your account → Email admin. Everyone else sees only their own account page.
- Sign in with your mailbox and password as usual, then press “Email admin”.
- The first time, set up two-factor sign-in (see below). After that, enter a code from your authenticator app each time you sign in.
- Use the tabs to move between Overview, Mailboxes, Forwarding, Spam, Plan, Activity, Admins and Your security. “Help for this page” at the top of each one opens its part of this manual.
- Roles: the owner (one person) handles billing and decides who is an admin. Admins manage email but not billing or roles.
- Overview, Plan: how many mailboxes, how much storage and how many forwarding addresses you use, out of what your plan includes. The postmaster@ system mailbox doesn't count. Storage updates hourly.
- Overview, Domain setup (DNS): checks that redoakgroup.org's DNS records match what the mail service needs (incoming mail, sending permission, signature, spoofing policy, webmail address). Anything marked “Problem” or “Needs attention” shows the exact record to add or change; make the change where your domain's DNS is managed. Changes can take a few hours to show.
- Overview, Recent activity: the latest 5 events; “See all activity” opens the full log.
Setting up two-factor sign-in
Two-factor sign-in is required for owners and admins. You need an authenticator app on your phone, such as Google Authenticator, Microsoft Authenticator or 1Password.
- In the app, add an account and scan the QR code. If you can't scan, type in the key shown under it.
- Enter the 6-digit code the app shows and press “Turn on two-factor sign-in”.
- Save the 10 recovery codes shown. Each one lets you sign in once without your phone. They're shown only once.
- If the page was open for more than 15 minutes, reload it and scan the new code.
Signing in to Email admin with two-factor
Each time you open Email admin after signing in, enter the code your authenticator app shows.
- Each code works once, so wait for the next one if you've just used it.
- No phone? Enter one of your recovery codes instead. It's used up afterwards.
- After 5 wrong codes in 15 minutes, two-factor sign-in is paused for 15 minutes.
Mailboxes
Lists every @redoakgroup.org mailbox with its storage use, and lets admins add new ones within the plan.
- To add someone, enter the part of their address before the @ (and, if you like, their name and a storage cap), then press “Create mailbox”.
- A welcome sheet appears with their address, a one-time password and the links they need. Print it or pass the password on privately: it's shown only once and isn't stored anywhere.
- Ask them to sign in, choose their own password and add a recovery email.
- When every mailbox in the plan is in use, the page says so instead of showing the form. Remove a mailbox you no longer need, or ask your owner to add mailboxes.
- Labels: System (postmaster@, used by the mail system; it doesn't count against your plan), Owner, Admin, Disabled, and No recovery email.
- Storage cap: leave it empty and the mailbox shares the plan's storage.
Managing one mailbox
Press a mailbox's address to see its status, storage, daily sending and recovery email, and to change it.
- Reset password: makes a new one-time password with a welcome sheet, and signs the person out everywhere.
- Recovery email: set or remove the address they can reset their own password with. They and that address get an email about it.
- Storage cap: set a limit in GB, or leave it empty for none.
- Disable (for leavers): sets a random password nobody knows, removes the recovery email and any admin role, and signs them out. Their mail is kept and keeps arriving. Reset the password to use the mailbox again.
- Delete: type the address to confirm. This deletes the mailbox and all its mail for good, so save anything you need first.
- You can't change your own mailbox or the owner's here; use Your account for that.
Forwarding addresses and catch-all
A forwarding address (like sales@redoakgroup.org) has no mailbox of its own: it passes mail on to one or more people. They count against your plan's forwarding addresses, not its mailboxes.
- To add one, enter the part before the @ and the addresses to send it to (commas or one per line), then press “Add forwarding address”.
- To change where one goes, press “Change where it goes” under it, edit the list and press “Save”.
- To remove one, press “Delete” next to it.
- Catch-all decides what happens to mail sent to an address that doesn't exist: reject it (recommended), delete it silently, or deliver it to one address.
- Forwarding to Gmail, Yahoo, Outlook.com and similar turns on stricter spam filtering for your whole domain. The page warns you; forwarding to a mailbox on your own domain avoids it.
- Delivering all unknown addresses to one mailbox attracts a lot of spam.
Spam settings
These settings apply to every @redoakgroup.org mailbox. Each message gets a spam score; messages scoring above your setting are deleted before they reach anyone.
- Choose Relaxed (deletes only obvious spam), Standard, Strict, or Custom (a score from 1, the strictest, to 50), then press “Save”.
- Allow list: add a sender's address, or a whole domain as *@example.com, so their mail is never treated as spam.
- Block list: add senders whose mail should always be treated as spam.
- If real mail is going missing, choose a more relaxed setting or add the sender to the allow list.
Plan
Shows your plan and how many mailboxes, how much storage and how many forwarding addresses you use. The owner can ask for more here.
- Enter how many more mailboxes and/or how much more storage you need. Use the note for anything else, such as a different plan or another domain.
- Press “Send request”. VizMail confirms the price and sends an invoice before anything changes; sending a request doesn't charge you.
- Your requests are listed with their status. You can cancel one while it's still waiting.
- Admins can see the plan, but only the owner can ask for changes.
Activity log
A record of sign-ins, password changes, recovery emails and admin changes for every redoakgroup.org mailbox, newest first. Passwords and codes are never recorded.
- Enter an address under “Show one mailbox” to see just that person.
- Use “Older” and “Newer” to page through it.
- Times are shown in UTC.
Admins
Lists the owner and admins. Only the owner can add or remove admins.
- To add one, enter their @redoakgroup.org address and press “Make admin”. The mailbox must already exist.
- They set up two-factor sign-in the first time they open Email admin.
- To remove one, press “Remove” next to them. Their two-factor setup is deleted too.
- To change the owner, contact VizMail support.
Your security (admins)
Shows that two-factor sign-in is on and how many recovery codes you have left.
- To get new recovery codes, enter a code from your authenticator app and press “Make new recovery codes”. Your old codes stop working.
- Lost your phone and your recovery codes? Ask your email owner or VizMail support to reset your two-factor sign-in.
Keeping your account safe
A few habits keep your mailbox safe.
- We never ask for your password by email or phone. This site only asks for it on the sign-in, password and recovery pages.
- Use a password manager, or a long passphrase that you don't use anywhere else.
- If you get a notice that your password or recovery email changed and it wasn't you, contact your email administrator straight away.
Getting help
If something doesn't work, contact your email administrator or use the “Help and support” link at the bottom of every page.
